diff --git a/arduinoSensor/arduinoSensor.ino b/arduinoSensor/arduinoSensor.ino
deleted file mode 100644
index 1c2629858e3d4186a57696c62ba726876829b3cf..0000000000000000000000000000000000000000
--- a/arduinoSensor/arduinoSensor.ino
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
-  Repeating WiFi Web Client
-
- This sketch connects to a a web server and makes a request
- using a WiFi equipped Arduino board.
-
- created 23 April 2012
- modified 31 May 2012
- by Tom Igoe
- modified 13 Jan 2014
- by Federico Vanzati
-
- http://www.arduino.cc/en/Tutorial/WifiWebClientRepeating
- This code is in the public domain.
- */
-
-#include <SPI.h>
-#include <WiFiNINA.h>
-#include <ArduinoHttpClient.h>
-#include <ArduinoJson.h>
-#include "arduino_secrets.h"
-
-#include <Wire.h>
-#include <Adafruit_Sensor.h> 
-#include <Adafruit_BME280.h>
-#include "Adafruit_TSL2591.h"
-
-// Initialize sensors
-Adafruit_BME280 bme; // BME sensor which has pressure, humidity and temperature
-Adafruit_TSL2591 tsl = Adafruit_TSL2591(2591); // Luminosity sensor 
-
-///////please enter your sensitive data in the Secret tab/arduino_secrets.h
-char ssid[] = SECRET_SSID;        // your network SSID (name)
-char pass[] = SECRET_PASS;    // your network password (use for WPA, or use as key for WEP)
-
-int keyIndex = 0;            // your network key index number (needed only for WEP)
-
-int status = WL_IDLE_STATUS;
-
-int temp, humidity, luminosity;
-boolean api_success = false;
-
-// server address:
-char server[] = "192.168.0.8";
-IPAddress server_ip(192,168,0,8);
-int port = 8080;
-
-// Initialize the WiFi client library
-WiFiClient client;
-HttpClient http = HttpClient(client, server, port);
-
-unsigned long lastConnectionTime = 0, lastConnectionTime2 = 0, lastMovementTime = 0;        // last time you connected to the server, in milliseconds
-const unsigned long postingInterval = 60L * 30L * 1000L;                                    // delay (1 800 000 ms = 30 min) between updates, in milliseconds
-
-void setup() {
-  //Initialize serial and wait for port to open:
-  Serial.begin(9600);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for native USB port only
-  }
-
-  // Initialize pins
-  bme.begin(0x76);
-  tsl.begin();
-  tsl.setGain(TSL2591_GAIN_MED);
-  tsl.setTiming(TSL2591_INTEGRATIONTIME_300MS);
-  
-  // check for the WiFi module:
-  if (WiFi.status() == WL_NO_MODULE) {
-    Serial.println("Communication with WiFi module failed!");
-    // don't continue
-    while (true);
-  }
-
-  // attempt to connect to WiFi network:
-  while (status != WL_CONNECTED) {
-    Serial.print("Attempting to connect to SSID: ");
-    Serial.println(ssid);
-    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
-    status = WiFi.begin(ssid, pass);
-
-    // wait 10 seconds for connection:
-    delay(10000);
-  }
-  // you're connected now, so print out the status:
-  printWifiStatus();
-}
-
-// MAIN LOOP
-void loop() {
-  // if there's incoming data from the net connection.
-  // send it out the serial port.  This is for debugging
-  // purposes only:
-  while (client.available()) {
-    char c = client.read();
-    Serial.write(c);
-  }
-
-  // Send the data
-  // If 30 minutes has been passed since last posting, then take measurements and post again
-  if (millis() - lastConnectionTime > postingInterval) {
-    temp = bme.readTemperature();
-    humidity = bme.readHumidity();
-    luminosity = tsl.getLuminosity(TSL2591_VISIBLE);
-    httpRequest();
-  }
-}
-
-// Lähetetään pilveen sensori1:lle sensoreiden tiedot
-void httpRequest() {
-  // close any connection before send a new request.
-  // This will free the socket on the NINA module
-  Serial.println("making POST request");
-  String contentType = "application/x-www-form-urlencoded";
-  String postData ="temperature=";
-         postData += temp;
-         postData += "&humidity=";
-         postData +=  humidity;
-         postData += "&luminosity=";
-         postData += luminosity;
-         postData += "&parent_id=";
-         postData += 1;
-  
-  http.post("/api/v1/nodeData", contentType, postData);
-
-  // read the status code and body of the response
-  int statusCode = http.responseStatusCode();
-  String response = http.responseBody();
-
-  Serial.print("Status code: ");
-  Serial.println(statusCode);
-  Serial.print("Response: ");
-  Serial.println(response);
-  
-  // note the time that the connection was made:
-  lastConnectionTime = millis();
-}
-
-// Tulostetaan wifin tiedot
-void printWifiStatus() {
-  // print the SSID of the network you're attached to:
-  Serial.print("SSID: ");
-  Serial.println(WiFi.SSID());
-
-  // print your board's IP address:
-  IPAddress ip = WiFi.localIP();
-  Serial.print("IP Address: ");
-  Serial.println(ip);
-
-  // print the received signal strength:
-  long rssi = WiFi.RSSI();
-  Serial.print("signal strength (RSSI):");
-  Serial.print(rssi);
-  Serial.println(" dBm");
-}